Wattage: 220 Watt (Work perfect on lower wattage power supply system as
replacement/upgrade)
Type: Flex ATX
Frequency: 60 / 50 Hz
Input Voltage: 115/230 Volts AC
Output Voltage: +5V 12A, -5V 0.5A, +12V 12A, -12V 0.8A, +3.3V 12A,
+5V-SB 2.5A
Dimensions: ( W x H x D ) 3.4" x 2.5" x 7"
Connector included: ATX Connector 24 (20+4) Pin X 1 PC, P4-12V 4 Pin X 1 PC, SATA 15 Pin X 2PC,
Molex 4 Pin X 2 PC, Floppy 4 Pin X 1 PC
Temperature Range: Operating: 0鎺矯 ~ +50鎺矯 on Full Load.
Storage & Shipping: -20鎺矯 ~ +80鎺矯
Humidity: 5 ~ 90% on
Operating, 5 ~ 95% on Storage
Dielectric Withstand: Primary Frame Ground 1800V AC for 1 Second
MTBF: 100,000 Hours on Maximum Load at +25鎺矯
Rise time: Less than
20ms
Hold-up Time: 17ms Minimum at Nominal Input Voltage
ENP-2320 ENP-2322A ENP-0616A ENP-0616B ENP-2320 5188-2755 5188-7521 5188-7602 DPS-
160QB
HP Slimline s3000
HP ENP-2320 Power Supply Tips
1.Make sure the HP ENP-2320 adapter and cables are dry before connecting to the laptop or wall outlet.
2.Plug the AC adapter into the laptop. Check to see if the charge indicator is lit. If it lights up that means the laptop can recognizes it.
3.Due to the length of their cables,HP ENP-2320 adapters can easily become safety hazards. To prevent people from tripping, make sure your power adapter's cables are never off the floor.
4.Using an AC power adapter that is not compatible with your laptop can damage the battery. Using voltage that is too low can force the laptop to rely partially on the battery. Too much voltage can destroy the battery.
5.Be certain that the adapter for HP ENP-2320 is properly connected to the power port, as a loose connection canprevent the laptop from recognizing the adapter.
6.The HP ENP-2320 Power Supply plug for a laptop has to be cleaned when the plug appears dirty or corroded, or if the battery indicator blinks on and off intermittently, indicating a bad connection between the AC plug and the laptop jack. It will also take difficult for the AC adapter to recharge the laptop battery if the connection is going bad.
7.Problems with the laptop battery can affect the performance of the power adapter. If the battery is defective, the laptop may not recognize the power HP ENP-2320 adapter.
8.As with laptops, which are typically placed inside laptop bags or padded envelopes, HP ENP-2320 Power Supply should be stored properly when not in use. The charger must never be exposed to extreme temperatures, such as those on a car's dashboard in the middle of summer or dead of winter.
Tags:HP ENP-2320 Power Supply,Cheap ENP-2320,ENP-2320 SG adapter,HP ENP-2320 Chargers, 220W HP ENP-2320,replace ENP-2320,rechargeable ENP-2320,HP Slimline s3000 Series.
